Ride on Concrete Laser Screed
The Laser Screed is used in large area concrete construction, such as the modern industrial workshop, the large market, storage, airport, the plaza, and so on. The Laser Screed can satisfy the construction requirements of large area and high
planeness and levelness.
1. Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency.
2. The Laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional way, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
| Model |
RWJP12 |
| Engine |
|
| Model |
HONDA GX630 Electric start |
| Type |
Gasoline engine, air cooled, 4 stroke, OHV, double cylinder |
| Power |
20hp/3600rpm |
| Oil tank volume |
40L |
| Lubricant L |
1.9L |
| Fuel consumption |
313g/kWh |
| Running device |
|
| Drive |
4 hydraulic drive motor |
| Wheel |
Solid puncture-proof tyre |
| Running speed |
0-35m/min |
| Screed system |
|
| Type |
Fixed |
| Width |
2500mm |
| Paving type |
With auger |
| Auger force |
Hydraulic motor |
| Exciting force |
500N |
| Vibration frequency |
50Hz |
| Screed plate height |
330mm |
| Laser control system |
|
| Control type |
Microcomputer laser scan |
| Control effect |
Flat, slope or double slope(3D) |
| Operation mode |
|
| Chair position |
Ride-on forward type |
| Forward and reverse |
Hand grip control, stepless speed walking |
| Steering |
Hydraulic control |
| Cleaning system |
|
| Power |
Hydraulic motor |
| Theoretical flow |
20L/min |
| Rated power |
7Mpa |
| Size and weight |
|
| Outside size |
2559×2760×2330mm |
| Weight |
1080kg |
| Model |
RWJP14 |
| Engine |
|
| Model |
HONDA GX630 Electric start |
| Type |
Gasoline engine, air cooled, 4 stroke, OHV, double cylinder |
| Power |
20hp/3600rpm |
| Oil tank volume |
40L |
| Lubricant L |
1.9L |
| Fuel consumption |
313g/kWh |
| Running device |
|
| Drive |
4 hydraulic drive motor |
| Wheel |
Solid puncture-proof tyre |
| Running speed |
0-35m/min |
| Screed system |
|
| Type |
Swing type |
| Width |
2500mm |
| Paving type |
With auger |
| Auger force |
Hydraulic motor |
| Exciting force |
500N |
| Vibration frequency |
50Hz |
| Screed height |
350mm |
| Laser control system |
|
| Control type |
Microcomputer laser scan |
| Control effect |
Flat, slope or double slope(3D) |
| Operation mode |
|
| Chair position |
Ride-on forward type |
| Forward and reverse |
Hand grip control, stepless speed walking |
| Steering |
Hydraulic control |
| Cleaning system |
|
| Power |
Hydraulic motor |
| Theoretical flow |
20L/min |
| Rated power |
7Mpa |
| Size and weight |
|
| Working size |
2717×2760×2380mm |
| Weight |
1200kg |
){kind=link}