Concrete Laser Screed Ride

• After-sales Service: Yes
• Warranty: One Year
• Certification: ISO9001: 2000, CE
• Condition: New
• Color: Orange
• Transport Package: Yes
• Model NO.: RWJP15
• Specification: 1200kg
• Trademark: Roadway
• Origin: Shandong

Product Description

Ride on Concrete Laser Screed RWJP15C

The Laser Screed is used in large area concrete construction, such as the modern industrial workshop, the large market, storage, airport, the plaza, and so on. The Laser Screed can satisfy the construction requirements of large area and high planeness and levelness.

1. Use high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.
2. Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the work with high efficiency.
3. The Laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional way, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly.
4. The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
5. The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency
6. Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of the seat, is user-friendly.
7. The machine with solid puncture-proof tire can do the on the mat reinforcement.
8. The high-pressure cleaning system, can easily remove the concrete on the machine to insure the normal use and prolong the service life

1. USA Trimble transmitter or European Leica system
2. YANMAR diesel engine
3. hydraulic pump
4. WHITE Motor
5. With CE certificate
 

    HYDRAULIC                                                               LEICA OR TRIMBLE                                                     SCREED HEAD MOVE  
     SYSTEM                                                                     LASER SYSTEM                                                             HORIZONTALLY

    ADJUSTMENT                                                HYDRAULIC VIBRATION                                               SEAT FORWARD

 SPECIAL DESIGN FOR                                             WEAR RESTSTANT                                                        UPPER OF SCREED
AUGER BEARING                                                        AGUER                                                                             HEAD
 

            FOUR WHEELS IN                                            STEERING WHEEL                                                HIGH PRESSURE
             FRONT                                                                                                                                               WASHER
1. Max slab thickness is 30cm;
2. The comfortable seat let operator reduce fatigue;
3. Control panel installed in front, the operator inspect the result of floor is easy;
4. The machine has cleaning system, pressure bomb 70 bars, expediently clean the machine;
5. For concrete + rebar and concrete +fiber, if the slump >=120mm, the accuracy is ±1.5mm / 3m;
6. For concrete + rebar: min steel is 10mm, if the steel is 10mm, Max space is 100mm; if the steel is 12mm, Max space is 150mm; if the steel diameter is more than 12mm, the Max space is 200mm, and the space for steel supporter is 1m;
 

Model	RWJP15C
Engine
Model	Yanmar
Type	Diesel engine,liquid cooled,4stroke,three cylinder
Power	25hp/3000rpm
Fuel tank volume	40L
Lubricant L	2.7L
Fuel consumption	286g/kWh
Running device
Drive	4 hydraulic drive motor
Wheel	Solid puncture-proof tyre
Running speed	0-35m/min
Screed system
Type	Swing type
Width	2500mm
Paving type	With auger
Auger force	Hydraulic motor
Exciting force	500N
Vibration frequency	50Hz
Screed height	350mm
Laser control system
Control type	Microcomputer laser scan
Control effect	Flat, slope or double slope(3D)
Operation mode
Chair position	Forward type
Forward and reverse	Hand grip control, stepless speed walking
Steering	Hydraulic control
Cleaning system
Power	Hydraulic motor
Theoretical flow	20L/min
Rated pressure	7Mpa
Size and weight
Working size	2850×2950×2350mm
Weight	1300kg